Watts Water Hammer Arrestor size 3/4” – Model LF15M2-B-موديل LF15M2-B Watts 3/4" مانع مطرقة مائية مقاس
What is Water Hammer?
The noise from banging pipes is caused by shocks from high-speed water flowing in the piping system when a fixture is suddenly closed. A sudden stoppage of the water (a non-compressible liquid) flowing at a given pressure and velocity causes a surge or spike of water and is called a water hammer. When this occurs, a pressure wave travels back through the piping until it finds a point of relief.
The LF15M2 and LF15M2S Water Hammer Arrestors are designed to eliminate this effect. The LF15M2 and LF15M2S features Lead Free* construction to comply with Lead-Free* requirements. Dishwashers, clothes washers, and fast-closing positive shutoff valves incorporated in the system all contribute to creating water shock which is not only annoying but damaging to pipes and appliances.
Specifications:
- NPT solid hex brass adapter or solder end connection for easy installation.
- Approved for installation with no access panel required.
- May be installed in new or existing plumbing systems with a standard pipe tee vertically, horizontally, or at any angle.
- PDI Listed (PDI WH201).
- Maintenance-free – piston is the only moving part.
- Air pre-load is 60psi (4.2 bar).
- Factory air charged and permanently sealed.
- The Watts Series LF15M2 and LF15M2S incorporate a precharged, permanently sealed air chamber to absorb the shock.
- The sealed chamber prevents the loss of air to the water and assures
- long and trouble-free life.
Technical Service: The Technical Department is available to assist you in the correct use of our products and its resources are at your disposal entirely without obligation.